Update 4/25/2024 updated 4/28/2024 updated 5/2/2024
We are still waiting for the A/C Unit to come in. In the interim, we were able to by-pass that system temporarily to continue testing the system and came upon a problematic leak in a sensitive area. The pump vault has two lines leading to the main line. Each is dedicated to one of our two pumps. On the 90 degree angle of the steel (blue) pipe in the bottom of the hole and near the middle of the picture, there is a leak that we literally corked as we were working out the issue. We have all of the parts necessary to make the fix, but first we must drain the water from the vault after we drain the irrigation holding tank to just below the intake filters seen in the picture below because the water in the vault will spill out once we cut the pipe, and will continue to spill water from the irrigation holding tank unless the water level is below the intake filters. This is more difficult to repair than we had hoped, but we are sure it can be accomplished. It would be helpful if you could hold...